Description:

Remote Dog training LCD 100 Levels 300 Meters with 2 unit collars. To control two receiver, simply choice the different channel 1 or 2 to encode the receiver. After encoding one receiver, then install the battery for the second receiver and press the channel button to change to channel 2, and then press the launch button to encode the second receiver. The steps are exactly same as before.

Main features

1. Range up to 300 meters

2. 100 levels of vibration

3. 100levels of static(optional)

4. the system is used for 2 reveivers

5. Featured power saving design

What is in the box:

1. remote controller x1

2. receive collar x2

3. batteries needed

Operational Instructions:

1. The controller will be standby if there is no operation after 20 seconds. And it will be turned off automatically after there is no operation within 1 minutes.

2. In standby mode, you just need to press any button to wake it up except light button.

3. If the unit is turned off, keep pressingmode button for 5 seconds to turn on the controller.

4. Open the insert buckle of the collar and put the collar round the neck of the pet. Adjust the tightness of collar. Don'tmake it too tight while the discharging point of the receiver can touch the neck of the pet.

5. Most pets feel uncomfortable at first wearing the collar. Don't use any of the functions before the pet has gotten used to the collar.

6. The vibration or shock function will be stopped once you release launch button.

7. The shock is used to curb the improper deeds of the pet. After each successful training, the owner

will be able to let the pet know what should be done and what should not be done. Over a period of training

the pet will understand what its owner likes and doesn't like.

8. We suggest you give the dog vibration before starting the shock. After a time of training, the dog

will learn that shock will come after vibration. In this way, the vibration alone can effectively curb the

improper deeds of the pet. The shock only acts as a menace thatmight be unnecessary formost of the time.

9. Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training.

10. The LED can be used for illumination or giving training signals.

11. If you don't use this product, take the collar and receiver off the dog and place themin a placewithout

vibration, so as to prolong the lifetime of the batteries.

12. If you don't use the collar receiver for a long time, take out the batteries.